Skip to main content

Q42ConstituentLutEntry

Struct Q42ConstituentLutEntry 

Source
#[repr(C, align(64))]
pub struct Q42ConstituentLutEntry {
Show 22 fields pub albedo_rgb_f16: [u16; 3], pub roughness_f16: u16, pub kubelka_munk_k_s: [u16; 2], pub refractive_index_x100: u16, pub bulk_density_kg_m3: u16, pub porosity_pct: u8, pub friction_angle_deg: u8, pub cohesion_kpa: u16, pub youngs_modulus_mpa: u16, pub poissons_ratio_x100: u8, pub _pad0: u8, pub permeability_darcy_x100: u16, pub suction_head_mm: u16, pub van_genuchten_n_x100: u16, pub dielectric_permittivity_x100: u16, pub electrical_conductivity_ms_m: u16, pub acoustic_p_wave_m_s: u16, pub ceremonial_permission_mask: u32, pub canonical_q42_material_hash: u64, pub provenance_did_hash: u64, pub _reserved: [u8; 4], pub entry_crc32c: u32,
}
Expand description

Fixed 64-Byte Constituent Look-Up Table Entry.

Fields§

§albedo_rgb_f16: [u16; 3]

6B: Diffuse albedo in linear RGB (f16 half-floats).

§roughness_f16: u16

2B: Surface microfacet roughness (f16 half-float).

§kubelka_munk_k_s: [u16; 2]

4B: Kubelka-Munk absorption (K) and scattering (S) coefficients (f16).

§refractive_index_x100: u16

2B: Real refractive index n * 100 (e.g. 154 = 1.54 for Quartz).

§bulk_density_kg_m3: u16

2B: Solid grain density in kg/m³ (e.g. 2650 for Quartz, 1000 for Water).

§porosity_pct: u8

1B: Material porosity ratio φ (0..100%).

§friction_angle_deg: u8

1B: Internal friction angle φ_friction in degrees (e.g. 34° for sand).

§cohesion_kpa: u16

2B: Mohr-Coulomb cohesion c in kPa (e.g. 0 for sand, 25 for stiff clay).

§youngs_modulus_mpa: u16

2B: Young’s Modulus E in MPa (e.g. 35000 MPa for granite).

§poissons_ratio_x100: u8

1B: Poisson’s ratio ν * 100 (e.g. 25 = 0.25).

§_pad0: u8

1B: Padding for alignment.

§permeability_darcy_x100: u16

2B: Hydraulic permeability κ in 0.01 Darcy units (e.g. 150 = 1.50 Darcy).

§suction_head_mm: u16

2B: Capillary suction head in mm.

§van_genuchten_n_x100: u16

2B: van Genuchten empirical exponent n * 100.

§dielectric_permittivity_x100: u16

2B: Real relative dielectric permittivity ε_r * 100 (e.g. 450 = 4.5 for quartz).

§electrical_conductivity_ms_m: u16

2B: Electrical conductivity in mS/m.

§acoustic_p_wave_m_s: u16

2B: Biot poroelastic P-wave acoustic velocity in m/s.

§ceremonial_permission_mask: u32

4B: Biocultural/ceremonial permissions & customary access mask.

§canonical_q42_material_hash: u64

8B: Canonical FNV-1a hash of the did:q42 mineral/material IRI.

§provenance_did_hash: u64

8B: FNV-1a hash of the provenance DID / author custodian.

§_reserved: [u8; 4]

4B: Explicit zero reserved.

§entry_crc32c: u32

4B: CRC-32C checksum of bytes 0..59 (Total = 64B).

Implementations§

Source§

impl Q42ConstituentLutEntry

Source

pub fn compute_crc32c(&self) -> u32

Compute the CRC-32C over the first 60 bytes of the record.

Source

pub fn update_crc(&mut self)

Update entry_crc32c with the computed CRC-32C.

Source

pub fn validate(&self) -> Result<(), M64Error>

Validate the CRC-32C of this LUT entry.

Trait Implementations§

Source§

impl Clone for Q42ConstituentLutEntry

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Copy for Q42ConstituentLutEntry

Source§

impl Debug for Q42ConstituentLutEntry

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl Default for Q42ConstituentLutEntry

Source§

fn default() -> Self

Returns the “default value” for a type. Read more
Source§

impl PartialEq for Q42ConstituentLutEntry

Source§

fn eq(&self, other: &Self) -> bool

Equality operator ==. Read more
1.0.0 (const: unstable) · Source§

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=. Read more
Source§

impl Pod for Q42ConstituentLutEntry

Source§

impl StructuralPartialEq for Q42ConstituentLutEntry

Source§

impl Zeroable for Q42ConstituentLutEntry

§

fn zeroed() -> Self

Auto Trait Implementations§

Blanket Implementations§

§

impl<S, A> Aggregate<Result<S, Error>> for A
where A: Aggregate<S>,

§

fn from_shares<T>(iter: T) -> Result<A, Error>
where T: IntoIterator<Item = Result<S, Error>>,

Aggregate shares in an MPC protocol.
Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> AnyBitPattern for T
where T: Pod,

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<T> CheckedBitPattern for T
where T: AnyBitPattern,

§

type Bits = T

Self must have the same layout as the specified Bits except for the possible invalid bit patterns being checked during is_valid_bit_pattern.
§

fn is_valid_bit_pattern(_bits: &T) -> bool

If this function returns true, then it must be valid to reinterpret bits as &Self.
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Downcast<T> for T

§

fn downcast(&self) -> &T

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
§

impl<T> Interleave for T
where T: Pod,

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> NoUninit for T
where T: Pod,

§

impl<T> NoneValue for T
where T: Default,

§

type NoneType = T

§

fn null_value() -> T

The none-equivalent value.
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> Upcast<T> for T

§

fn upcast(&self) -> Option<&T>

§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WasmNotSend for T
where T: Send,

§

impl<T> WasmNotSendSync for T
where T: WasmNotSend + WasmNotSync,

§

impl<T> WasmNotSync for T
where T: Sync,

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more