Skip to main content

ThreeBandParametricBiquad

Struct ThreeBandParametricBiquad 

Source
pub struct ThreeBandParametricBiquad {
    pub sample_rate: f32,
    pub low_shelf: Df2tBiquad,
    pub mid_peak: Df2tBiquad,
    pub high_shelf: Df2tBiquad,
}
Expand description

3-Band Parametric Equalizer consisting of cascaded DF2T biquads:

  1. Low Shelf (200 Hz anchor)
  2. Mid Peaking (1000 Hz anchor)
  3. High Shelf (8000 Hz anchor)

Fields§

§sample_rate: f32

Sample rate the coefficients were computed for (clamped to ≥ 8 kHz).

§low_shelf: Df2tBiquad

Low shelf stage at ANCHOR_LOW_HZ (200 Hz).

§mid_peak: Df2tBiquad

Mid peaking stage at ANCHOR_MID_HZ (1 kHz).

§high_shelf: Df2tBiquad

High shelf stage at ANCHOR_HIGH_HZ (8 kHz).

Implementations§

Source§

impl ThreeBandParametricBiquad

Source

pub fn new(sample_rate: f32) -> Self

Create an EQ at flat unity response (0 dB on all bands), coefficients snapped to target so no ramping occurs on the first quantum.

Source

pub fn snap_to_target(&mut self)

Snap active coefficients directly to target (useful on init or seek).

Source

pub fn reset_states(&mut self)

Reset internal filter state registers (clear delay lines).

Source

pub fn set_band_gains_db( &mut self, low_gain_db: f32, mid_gain_db: f32, high_gain_db: f32, )

Configure band gains in decibels for the next 128-sample quantum.

Source

pub fn set_from_spectral_coeffs(&mut self, c0: f32, c1: f32, c2: f32)

Map continuous Jakob & Hanika spectral polynomial coefficients $(c_0, c_1, c_2)$ directly to the 3-band acoustic parameters.

Source

pub fn process_quantum(&mut self, buffer: &mut [f32; 128])

Process a single 128-sample quantum in-place with zero allocations. Injects $10^{-24}$ DC offset into each sample to prevent mobile ARM NEON denormal stalls.

Source

pub fn process_slice(&mut self, input: &[f32], output: &mut [f32])

Process a caller-supplied slice of arbitrary length (multiple of 128 recommended). Zero heap allocation.

Trait Implementations§

Source§

impl Clone for ThreeBandParametricBiquad

Source§

fn clone(&self) -> Self

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for ThreeBandParametricBiquad

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

Auto Trait Implementations§

Blanket Implementations§

§

impl<S, A> Aggregate<Result<S, Error>> for A
where A: Aggregate<S>,

§

fn from_shares<T>(iter: T) -> Result<A, Error>
where T: IntoIterator<Item = Result<S, Error>>,

Aggregate shares in an MPC protocol.
Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Downcast<T> for T

§

fn downcast(&self) -> &T

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> FromRef<T> for T
where T: Clone,

§

fn from_ref(input: &T) -> T

Converts to this type from a reference to the input type.
§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self> ⓘ

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self> ⓘ

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T> IntoEither for T

Source§

fn into_either(self, into_left: bool) -> Either<Self, Self> ⓘ

Converts self into a Left variant of Either<Self, Self> if into_left is true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
Source§

fn into_either_with<F>(self, into_left: F) -> Either<Self, Self> ⓘ
where F: FnOnce(&Self) -> bool,

Converts self into a Left variant of Either<Self, Self> if into_left(&self) returns true. Converts self into a Right variant of Either<Self, Self> otherwise. Read more
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
§

impl<T> PolicyExt for T
where T: ?Sized,

§

fn and<P, B, E>(self, other: P) -> And<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] only if self and other return Action::Follow. Read more
§

fn or<P, B, E>(self, other: P) -> Or<T, P>
where T: Sized + Policy<B, E>, P: Policy<B, E>,

Create a new Policy that returns [Action::Follow] if either self or other returns Action::Follow. Read more
§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> Upcast<T> for T

§

fn upcast(&self) -> Option<&T>

§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

§

impl<T> WasmNotSend for T
where T: Send,

§

impl<T> WasmNotSendSync for T
where T: WasmNotSend + WasmNotSync,

§

impl<T> WasmNotSync for T
where T: Sync,

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self> ⓘ
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self> ⓘ

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more