Skip to main content

SoilMechanicsProfile

Struct SoilMechanicsProfile 

#[repr(C)]
pub struct SoilMechanicsProfile { pub cohesion_kpa: f32, pub friction_angle_rad: f32, pub bulk_density_kn_m3: f32, pub pore_water_pressure_kpa: f32, pub root_tensile_reinforcement_kpa: f32, pub soil_tool_adhesion_kpa: f32, pub bulking_factor: f32, pub angle_of_repose_rad: f32, pub unconfined_compressive_strength_kpa: f32, }
Expand description

Canonical geotechnical soil failure and physical mechanics profile.

Fields§

§cohesion_kpa: f32

Effective cohesion $c’$ in kPa (pure sand ~0, loam ~10, dense clay ~50+).

§friction_angle_rad: f32

Effective internal friction angle $\phi$ in radians (sand ~0.60 rad / 34°, clay ~0.35 rad / 20°).

§bulk_density_kn_m3: f32

Soil unit weight / bulk density $\gamma$ in kN/m³ (typical 15.0 - 20.0 kN/m³).

§pore_water_pressure_kpa: f32

Pore water pressure $u$ in kPa (negative for matric suction in damp soil, positive in saturated mud).

§root_tensile_reinforcement_kpa: f32

Wu-Waldron root tensile cohesion reinforcement $\Delta c_{\text{root}}$ in kPa.

§soil_tool_adhesion_kpa: f32

Soil-tool adhesion $c_a$ in kPa (sticky clay adhering to tool face).

§bulking_factor: f32

Volumetric bulking expansion factor $B_f = V_{\text{loose}} / V_{\text{bank}}$ (typically 1.15 - 1.35).

§angle_of_repose_rad: f32

Critical angle of repose for loose spoil heap in radians ($\theta_r \approx \phi$).

§unconfined_compressive_strength_kpa: f32

Unconfined compressive strength $q_u$ in kPa (identifies lithic refusal threshold).

Implementations§

§

impl SoilMechanicsProfile

pub fn humic_root_mat() -> SoilMechanicsProfile

Surface humic root-mat epipedon (Depth 1: 0–5 cm, dense subalpine grass roots).

pub fn loam() -> SoilMechanicsProfile

Friable sandy loam topsoil (Depth 2: 5–15 cm).

pub fn illuvial_clay() -> SoilMechanicsProfile

Dense plastic illuvial clay (Depth 4: 30–60 cm).

pub fn saprolite() -> SoilMechanicsProfile

Weathered gravelly saprolite / bedrock transition (Depth 5: 60–100 cm).

pub fn bedrock() -> SoilMechanicsProfile

Solid lithic bedrock (granite / basalt).

pub fn with_seasonal_state( &self, temp_c: f32, moisture_fraction: f32, ) -> SoilMechanicsProfile

Adjusts soil mechanical resistance across diurnal freeze-thaw and annual seasons.

  • $T \le 0^\circ\text{C}$: Cryo-cementation (needle ice / permafrost crust) causes cohesion and compressive strength to jump dramatically, leading to spade refusal.
  • $S_w > 0.80$: Spring snowmelt or saturated rain induces positive pore pressure ($u > 0$), dropping effective stress while boosting clay-tool adhesion ($c_a$).
  • $S_w < 0.20$: Summer drought creates strong matric suction ($u \ll 0$), baking clay into hard clods and generating airborne dust under mechanical impacts.

Trait Implementations§

§

impl Clone for SoilMechanicsProfile

§

fn clone(&self) -> SoilMechanicsProfile

Returns a duplicate of the value. Read more
1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Copy for SoilMechanicsProfile

§

impl Debug for SoilMechanicsProfile

§

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter. Read more
§

impl Default for SoilMechanicsProfile

§

fn default() -> SoilMechanicsProfile

Returns the “default value” for a type. Read more
§

impl PartialEq for SoilMechanicsProfile

§

fn eq(&self, other: &SoilMechanicsProfile) -> bool

Equality operator ==. Read more
1.0.0 (const: unstable) · Source§

fn ne(&self, other: &Rhs) -> bool

Inequality operator !=. Read more
§

impl StructuralPartialEq for SoilMechanicsProfile

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
§

impl<ST, DT> CastableFrom<ST, Initialized, Initialized> for DT
where ST: ?Sized, DT: ?Sized,

§

impl<ST, DT> CastableFrom<ST, Uninit, Uninit> for DT
where ST: ?Sized, DT: ?Sized,

Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<T> Downcast<T> for T

§

fn downcast(&self) -> &T

Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Read<Exclusive, BecauseExclusive> for T
where T: ?Sized,

Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = !

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, !>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<T> Upcast<T> for T

§

fn upcast(&self) -> Option<&T>

§

impl<T> WasmNotSend for T
where T: Send,

§

impl<T> WasmNotSendSync for T
where T: WasmNotSend + WasmNotSync,

§

impl<T> WasmNotSync for T
where T: Sync,